T24 hook ceiling grid

OWAconstruct T24 hook – 24mm, white, exposed, demountable, suspended ceiling grid.

Our T24 hook ceiling grid is a strong and rigid galvanised steel tee grid with 38mm high main runners and butt cut cross tees. It’s suitable for exposed, semi-concealed and concealed modular ceiling systems. The main runners interconnect end to end and the cross tees ‘hook’ onto the main runner, utilising punched slots at regular centres. This flexible design enables the configuration of a number of standard module sizes, e.g. 600 mm and 1200 mm. Also, each t-bar incorporates punched holes to accept pre-stressed galvanised steel hanging wire for installation. Alternatively, the installer can use rigid nonius hangers or galvanised steel angle.  We engineer and manufacture our premium OWAconstruct grids for strength. Hence, the main runners, which are the primary structural profile, are 0.4mm steel to ensure a robust and rigid system. Our customers and ceiling contractors appreciate the quality.

A ceiling contractor can demount or replace grid components when necessary. When combined with our square edge (E3) or tegular edge (E6) mineral wool tiles, the 24mm hook grid forms our S3 and S3a exposed suspended ceiling systems respectively. Or, when installed with our square edge (03) or tegular edge (06) metal tiles, the exposed hook grid forms our S33 lay-in suspended ceiling system. The butt cut cross tee joints enable square edge tiles to sit flat onto the t-bar, therefore the gap from below is minimal.

For more information please refer to the brochures and data sheets in the downloads section.